20TPH FFB Palm oil mill, palm oil mill screw press, machinery for palm oil production
Machines and equipment to start up palm oil refining plant with CE BV Certifications ,What kind of crude vegetable oil can be refine?
Crude soybean oil, palm oil, palm kernel oil, sunflower oil, canola oil(rapeseed oil) ,peanut oil, sesame oil, conttonseeds oil etc.
Hydration Deguming & Alkali Refining Deacidification of palm pressing process
The crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat exchanger to recover part of heat after metering and then is heated to the required temperature by the heater.
After that, the oil is mixed with the metered phosphoric acid or citric acid from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make the non-hydratable phospholipids in oil change into the hydratable phospholipids.
Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend on the quality of the crude oil.
Through the heater, the neutralized oil is heated to the temperature (90â) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil.
Then the oil goes to the washing process.
Palm oil pressing machine & machine detail
Machines and equipment to start up palm oil refining plant with CE BV Certifications Bleaching
Deodorization of palm oil pressing machine
In normal situation , there is pigment in the crude oil , we need to using the active clay
to absorb thepigment away , after 20 mins , we use the vibrating filter to filter the waste clay away .
If you wantto get ligLD color oil , you need to add more active clay . That is mean , the customer can
accord to hisrequirement to control the oil color. This process is carried out under the vacuum
Usually ,there are some odors in the crude oil , it affects the quality of the edible oil .
About ourrefining process , we usually use the direct steam to take odors away in the vacuum
General speaking there is about 0.5% water in the alkali refined oil, in the deodorization
pot,thetemperature is very high , it also can finish the dehydration section.
Filtering of palm oil pressing machine
This process can remove off the small amount of unsettle gum soluble impurities in the
oil, after oil dehydrate cooling (60 Â°C), filtering again, to ensure the product oil
quality. Then pumping
the final oil into the oil tank.
(1) Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.
(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.
(3) Deodorizing section: to remove off the odor components in oil.
(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.
(5) Heat-transfer oil stove: supply each device production needing heat enerLD, temperature
reach above 280C.
(6) Steam generator: produce the needing steam for de-odoring and distillation.
(7) Vacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree
can reach above 755mm Hg.
(8) Press filter: filter clay, filter out clear oil.
(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.
1 Engineers to the scene to guide the installation;
2 Online question reply;
3 The warranty period of 12 months;
Our engineers in guiding workers how to operate the machine:
Packaging & Shipping
Shandong Leader'E Grain&Oil Machine Co.,Ltd is a large-sized joint-equity enterprise which specialize in producting edible oil mechanical equipment andit is aslo a group enterprise integrating scientific research, manufacturing,sales as one.Our products are exported to more than 30 countries,and regions such as Russia, India, South Afica, Ukraine, Nepal, Indonesia and so on.
Contact with me