60TPH FFB Palm oil mill, palm oil mill design, equipment to start up palm oil mill process with CE BV Certifications
1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in
global grain and oil industry.
2, We have deep cooperation with Shandong Machine Design Research Institute and Shandong
University of TechnoloLD. Our professor often go abroad attending grain and oil conference and forum.
3, We have completed service line including technical department, engineering department,
project department, electronic commerce department, domestic trade department and foreign trade department.
After signing contract, we will set up special team including engineers, installation technicians, drawing
designer, business person, after-sales service person, and so on. We will provide one-to-one service.
Whole set of equipment for production line.
Motor and power control system.
Installation and test-run.
Drawing of process description, equipment layout, foundation and
Drawing of power control.
Isolation and painting for equipment.
Water recycling and cooling system outside the plant (i.e. supplementary device).
Staff training and long-term technical service.
Main Business Field
1, 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
2, 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot
dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake
extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
3, 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop
4, DTDC separated machine, the full negative pressure evaporation,
5, Paraffin wax recovery, leaching workshop degumming, phospholipid concentration.
6, 30-1000T/D continuous physical (chemical) refining line.
7, 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
8, 10-200T/D fatty acid esterification edible ol production line.
Available Oil Raw Materials:
Machines and equipment to start up palm oil refining plant with CE BV Certifications What kind of crude vegetable oil can be refine?
Crude soybean oil, palm oil, palm kernel oil, sunflower oil, canola oil(rapeseed oil)
sesame oil, conttonseeds oil etc.
Machines and equipment to start up palm oil refining plant with CE BV Certifications The main part of refining.
Machines and equipment to start up palm oil refining plant with CE BV Certifications Bleaching
Machines and equipment to start up palm oil refining plant with CE BV Certifications Hydration Deguming & Alkali Refining Deacidification
The crude oil is output by the oil feed pump from the oil tank, and next enters the crude
exchanger to recover part of heat after metering and then is heated to the required
by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid
phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to
the non-hydratable phospholipids in oil change into the hydratable phospholipids.
Add the alkali for neutralization, and the alkali quantity and alkali solution concentration
on the quality of the crude oil. Through the heater, the neutralized oil is heated to the
suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in
the crude oil.
Then the oil goes to the washing process.
In normal situation , there is pigment in the crude oil , we need to using the active clay
to absorb the
pigment away , after 20 mins , we use the vibrating filter to filter the waste clay away .
If you want
to get ligLD color oil , you need to add more active clay . That is mean , the customer can
accord to his
requirement to control the oil color. This process is carried out under the vacuum
Machines and equipment to start up palm oil refining plant with CE BV Certifications Deodorization
Usually ,there are some odors in the crude oil , it affects the quality of the edible oil .
refining process , we usually use the direct steam to take odors away in the vacuum
General speaking there is about 0.5% water in the alkali refined oil, in the deodorization
thetemperature is very high , it also can finish the dehydration section.
Machines and equipment to start up palm oil refining plant with CE BV Certifications Filtering
This process can remove off the small amount of unsettle gum soluble impurities in the
oil, after oil dehydrate cooling (60 Â°C), filtering again, to ensure the product oil
quality. Then pumping
the final oil into the oil tank.
3. Machines and equipment to start up palm oil refining plant with CE BV Certifications Main section
(1) Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.
(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.
(3) Deodorizing section: to remove off the odor components in oil.
(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.
(5) Heat-transfer oil stove: supply each device production needing heat enerLD, temperature
reach above 280C.
(6) Steam generator: produce the needing steam for de-odoring and distillation.
(7) Vacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree
can reach above 755mm Hg.
(8) Press filter: filter clay, filter out clear oil.
(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.
1 Engineers to the scene to guide the installation;
2 Online question reply;
3 The warranty period of 12 months;
Our engineers in guiding workers how to operate the machine:
Packaging & Shipping
Contact with me