English
See More
Palm oil processing machine, Palm oil production line, Crude Palm oil refinery and fractionation plant turn-key projectThe material of drum doby, drum cover and valve is high strength stainless steel, the Moc of other parts are all high quality, anti-corrosion SS304, the separator shell employ SS304.
Drive structure support use SKF bearing, by employing optimal design to reduce the heigLD of the drumâs center of gravity. It can effectively lower the vibrational level of the whole separator, improve the reliability of the equipment and increase the stability of the separator.
In the dismounting and maintenance, the parts of drum can be hoisted integrally, thus make the dismounting of main lock ring more convenient, saving both time and labor, easy to install the drum.
The separator runs supercurrent, it will send warning signals and be stoped if the machine overload, to make the separator runs safely.
The separator has a less vibration and more stability through price dynamic balance of the drum.
The separator adopts separation factor technoloLD. It can separate product that is hard to separate, meanwhile, the machine has ligLD volume and use the small volume to get big capacity and high separation efficiency.
The separator adopts advance belt drive, improving the reliability and maintainability of the separator, and decreasing cost of spare parts.
The vegetable oil sunflower oil refined soybean oil filling machine is suitable for filling edible oil,olive oil,motor oil,lubricant,gear oil,engine oil,all kinds of flowing liquid and so on.the vegetable oil sunflower oil refined soybean oil filling machine can fill different shapes of bottle such as round,flat,square,etc.
Company InformationCompany Information:
Our Service:
1, Whole set of equipment for production line.
2, Motor and power control system.
3, Installation material.
4, Installation and test-run.
5, Drawing of process description, equipment layout, foundation and hole, construction.
6, Drawing of power control.
7, Isolation and painting for equipment.
8, Water recycling and cooling system outside the plant (i.e. supplementary device).
9 Staff training and long-term technical service.
Main Business Field:
1, 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
2, 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot
dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake
extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
3, 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop
type extractor,
4, DTDC separated machine, the full negative pressure evaporation, Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
5, 30-1000T/D continuous physical (chemical) refining line.
6, 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
7, 10-200T/D fatty acid esterification edible oil production line.
8, Some edible oil machine product line.
Available Oil Raw Materials:
Refine
1.What kind of crude vegetable oil can be refine?
Crude soybean oil, palm oil, palm kernel oil, sunflower oil, canola oil(rapeseed oil)
,peanut oil, sesame oil, conttonseeds oil etc.
Hydration Deguming & Alkali Refining Deacidification
The crude oil is output by the oil feed pump from the oil tank, and next enters the crude
oil heat exchanger to recover part of heat after metering and then is heated to the required
temperature by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid
from phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to
make the non-hydratable phospholipids in oil change into the hydratable phospholipids.
Add the alkali for neutralization, and the alkali quantity and alkali solution concentration
depend on the quality of the crude oil. Through the heater, the neutralized oil is heated to the
temperature (90â) suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in
the crude oil. Then the oil goes to the washing process.
Bleaching
In normal situation , there is pigment in the crude oil , we need to using the active clay
to absorb the pigment away , after 20 mins , we use the vibrating filter to filter the waste clay away .
If you want to get ligLD color oil , you need to add more active clay . That is mean , the customer can
accord to his requirement to control the oil color. This process is carried out under the vacuum
condition.
Deodorization
Usually ,there are some odors in the crude oil , it affects the quality of the edible oil .
About our refining process , we usually use the direct steam to take odors away in the vacuum
condition . General speaking there is about 0.5% water in the alkali refined oil, in the deodorization
pot, the temperature is very high , it also can finish the dehydration section.
Filtering
This process can remove off the small amount of unsettle gum soluble impurities in the
degummed oil, after oil dehydrate cooling (60 °C), filtering again, to ensure the product oil
quality. Then pumping the final oil into the oil tank.
3.Main refininf section:
(1) Degumming section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.
(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.
(3) Deodorizing section: to remove off the odor components in oil.
(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.
(5) Heat-transfer oil stove: supply each device production needing heat enerLD, temperature
reach above 280C.
(6) Steam generator: produce the needing steam for de-odoring and distillation.
(7) Vacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree
can reach above 755mm Hg.
(8) Press filter: filter clay, filter out clear oil.
(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.
laboratory
Our Services
1 Engineers to the scene to guide the installation;
2 Online question reply;
3 The warranty period of 12 months;
Our engineers in guiding workers how to operate the machine:
Packaging & Shipping
Contact with me
Shandong Leader Mechanical Equipment Co., LTD supply the complete set of Cooking oil production line machinery including sunflower oil production line, palm oil production line, soya bean oil production line, peanut oil production line, cotton seeds oil production line, maize corn germ oil production line, clamelia oil production line, rapeseeds oil production line, canola oil production line, coconut cropra oil production line, shea oil production line, groundnuts oil line, sesame oil production line,black seeds oil production line, jatropha seeds oil production line,moringa seeds oil production line.
Welcome Contact us any time!
Contact:Heidi
Skype:heyabc
Tel:+86 15953125015(also Whatsapp)
Email:sales5@ldfoodmachine.com
Shandong Leader Mechanical Equipment Co., LTD is your LD choice!
Crispy Rice Food Processing Line
