The machine's edible oil 20mt/day refinery plant price fob parts use high quality of imported bearing and iol seal to ensure high efficient driving, stable and low niose operation.Shandong Leader Machinery Co.,ltd. Independent research and development of large air shaft without hoop equipment, overtuns the traditional process, make the equipment more stable and reduce the cost maintenance time of users.Palm Fruit Processing Machine Add non-stop refueling system, automatic system for the butter, air cooling system, high efficiency, low energy consumption, smooth operation, the pellet quality is stable and reliable.Our product edible oil 20mt/day refinery plant price fob with high automation which can save labor, and Palm Fruit Processing Machine is also easy to maintain which save lots of maintance time.Shandong Leader Machinery Co.,ltd. is located in the 5A-class tourist city in China - Shandong Province, is a professional engaged in feed machinery complete sets of engineering and the biomass pellet machinery Palm Fruit Processing Machine complete sets of engineering design, development, sales, installation and debugging of high-tech enterprises, the company covers an area of 5000 square meters.
edible oil 20mt/day refinery plant price fob
edible oil 20mt/day refinery plant price fob
1, edible oil 20mt/day refinery plant introduction
What kind of palm oil refinery plant we can supply ?
1. Batch type palm oil refinery plant: 1-30tons per 24hrs.
2. Semi-continuous type crude oil refinery: 20-50tons per 24hrs.
3. Continuous type crude oil refinery: 30-600tons per 24hrs.
What kind of crude vegetable oil can be refine?
Crude soybean oil, palm oil, palm kernel oil, sunflower oil, canola oil(rapeseed oil) ,peanut oil,
sesame oil, conttonseeds oil etc.
2, edible oil 20mt/day refinery plant main procedures
Hydration Deguming & Alkali Refining Deacidification
The crude oil is output by the oil feed pump from the oil tank, and next enters the crude oil heat
exchanger to recover part of heat after metering and then is heated to the required temperature
by the heater. After that, the oil is mixed with the metered phosphoric acid or citric acid from
phosphate tank in the gas mixture (M401), and then enters the conditioning tank (R401) to make
the non-hydratable phospholipids in oil change into the hydratable phospholipids.
Add the alkali for neutralization, and the alkali quantity and alkali solution concentration depend
on the quality of the crude oil. Through the heater, the neutralized oil is heated to the temperature (90Ã¢ÂÂ)
suitable for centrifugal separation to remove the phospholipids, FFA and other impurities in the crude oil.
Then the oil goes to the washing process.
In normal situation , there is pigment in the crude oil , we need to using the active clay to absorb the
pigment away , after 20 mins , we use the vibrating filter to filter the waste clay away . If you want
to get light color oil , you need to add more active clay . That is mean , the customer can accord to his
requirement to control the oil color. This process is carried out under the vacuum condition.
Usually ,there are some odors in the crude oil , it affects the quality of the edible oil . About our
refining process , we usually use the direct steam to take odors away in the vacuum condition .
General speaking there is about 0.5% water in the alkali refined oil, in the deodorization pot,
thetemperature is very high , it also can finish the dehydration section.
This process can remove off the small amount of unsettle gum soluble impurities in the degummed
oil, after oil dehydrate cooling (60 ÃÂ°C), filtering again, to ensure the product oil quality. Then pumping
the final oil into the oil tank.
3, edible oil 20mt/day refinery plant functions of main parts
(1) Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.
(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.
(3) Deodorizing section: to remove off the odor components in oil.
(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.
(5) Heat-transfer oil stove: supply each device production needing heat energy, temperature reach
(6) Steam generator: produce the needing steam for de-odoring and distillation.
(7) Vacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree
can reach above 755mm Hg.
(8) Press filter: filter clay, filter out clear oil.
(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.
1, Established in 1982, we have more than 30 years experience. Our goal is to be pioneer in global grain and oil
2, We have deep cooperation with Henan Machine Design Research Institute and Henan University of
Technology. Our professor often go abroad attending grain and oil conference and forum.
3, We have completed service line including technical department, engineering department, project department,
electronic commerce department, domestic trade department and foreign trade department. After signing
contract, we will set up special team including engineers, installation technicians, drawing designer,
business person, after-sales service person, and so on. We will provide one-to-one service.
Whole set of equipment for production line.
Motor and power control system.
Installation and test-run.
Drawing of process description, equipment layout, foundation and
Drawing of power control.
Isolation and painting for equipment.
Water recycling and cooling system outside the plant (i.e. supplementary device).
Staff training and long-term technical service.
Main Business Field
Available Oil Raw Materials
- 10-500T/H oil material primary cleaning,drying and storage section turn-key project.
- 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.
- 100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,
- DTDC separated machine, the full negative pressure evaporation,
- Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).
- 30-1000T/D continuous physical (chemical) refining line.
- 20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.
- 10-200T/D fatty acid esterification edible oil production line.
The company Palm Fruit Processing Machine has passed IOS9001 quality certification system and a series of the utility mode patent.Company has a large edible oil 20mt/day refinery plant price fob finishing workshop, assembling workshop, equipped with large bending equipment, Shandong Leader Machinery Co.,ltd. laser cutting machine Palm Fruit Processing Machine and other large machinery processing equipment. With our professional technology combining the status of local customers , Palm Fruit Processing Machine design and installation for the customer production 1-10 tons of various biomass granule complete molding equipment.
The company Shandong Leader Machinery Co.,ltd. will be adhering to the "Sincerity - Quality Win" business philosophy, with superior technology , excellent quality, excellent service, focus on the development and innovation of biomass granule complete molding equipment Palm Fruit Processing Machine.
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
NOTE:We can specially design the machine according to your production's features.