Shandong Leader Machinery Co.,Ltd. has specialized quality supervision team with sturdy management system. As microwave equipment is newly emerging industry, there is no quality standard for many companies, while for us, we have established a set of industrial standard and put on record in relevant regulatory institution. We have complete ancillary facilities including NCT, CNC Bending Machine., conforming to GB5226 electrical safety standards.
1.Extracte oil from waste actived clay
2.Solvent Extraction plant
4.Higher oil rate
Actived clay extraction machine, if you wnat to know more info, please feel free to contact me.
At present, edible oil production process have two kind of processing method: pressing and leaching(extraction). Pressing method is by physical pressure and get oil directly from the oil seeds. The whole process does not involve any chemical additives, to ensure product safety, health, pollution-free. The expeller method is divided into cold pressing and hot pressing. The difference of cold pressing and hot pressing is whether use high-temperature process or not. Hot pressing using a high temperature, can improve the oil yield, but destroy nutrients; cold-pressed not to use high temperature, the oil is low, but the complete nutritional ingredients.
1..1 Here have some example of hot pressing and cold pressing method.
1.1.1 Process and methods of soybean seeds pressing.
There are two ways of pressing of soybean: cold press and hot press.
(1) Soybean cold press process: Soybean---Filtering---Press(suitable moisture)
(2) Hot press process: Soybean---Cleaning---Prepressing---Crude soybean oil---Filter---Twice pressing---Crude soybean oil after twice pressing---Filter
(3) Introduction of process: Will screen soybean and cleaning soybean first, then crushing soybean and add 7-8% of water to soften the seeds, send soybean to cooker, steam until about 115Â°C, then will press seeds.
1.1.2 Process and method of rapeseed press:
The rapeseed have two ways of pressing, cold press and hot press. To improve the oil yield and oil quality, generally the hot press is used.
(1) Cold press:Rapeseed/vegetable seeds---Screening---Squeezing---Steaming----Pressing, First, Screening the rapeseed and check the moisture content of rapeseed, if the rapeseed too dry, we need to add 2.5-3% water, later put the seeds into the expeller.
(2) Hot press: Rapeseed/vegetable seeds---Screening---Squeezing---Steaming----Pressing, Filter the rapeseed and remove the residue, and then enter the flaking machine for seeds flaking. After flaking, will go into the cooker for steaming and roasting, during steaming add 2-3% water, will start milling after the seeds become brown and the temperature is 110-120Â°C.
1.1.3 The process and method of peanut kernel pressing.
Hot press and cold press is suitable for peanut kernel, generally we use hot press. Hot pressing, the first crushing or flaking the peanut kernel, then placed in the steamer for 1.5-2 hours. When the cakeâs temperature arrives 120Â°C and water content is 3%, will start normal squeezing.
Peanut----Cleaning---First milling---filter----Press two times---Crude oil----Refinery---Press third times---Crude oil after pressing----Filter----Cake after pressing.
1.2 The leaching(extraction) method
is to use solvent napLDha (6#) after fully immerse oil meal raw material to high temperature (260 degrees) and extract the oil from seeds meal, after a "technoloLD of sixâ (degreasing, degumming, dewatering, decoloring, deodorization, deacidification). The biggest characteristic is high oil yield and low production cost, the price is lower than squeezing method.
The extraction(LEACHING) method is widespread used in the market. Because of high oil yield and low production cost, the extraction(leaching) machine is hot sale in the worldwide.
2. The difference of pressing and extraction(leaching):
Squeezing method due to the yield is low, so the raw material for squeezing must be seeds of high oil content, and itself is probably oil crops; Due only to squeeze at the same time, the residual oil in the cake is high, so the modern enterprise in order to save resources, the pursuit of efficiency of cases will be to squeeze the oil cake with leaching rule of oil again
The extraction method applies to vast oil seeds. Especially those high nutritional value but low oil yield seeds. Due to the advantage of leaching, this method is widely used in the cooking oil industrial. Approximately 90% of the oil in the world is using extraction method.
3. Raw material
Used carclazyte after refinery.
4. Professional suggestion
Kindly please inform us your required daily capacity, quantity, raw material, covering space and related data,so that we can provide you professional equipment information and design proper oil production line for you. we will suggest economical and reasonable production line for you.
Welcome to contact us and get more information.
Small Scale Screw Pressing Machine is advanced black seed oil machine, characterized by simple design,easy to operate, high production capacity and high oil output rate. Moreover, this 30TPD actived clay oil extraction machine can be used for various raw materials, and depending on the oil content of particular crop you are pressing, 30TPD actived clay oil extraction machine will extract about 90%-95% oil of it.
A Screw consists basically of a worm assembly,a shft fitted with spirally-arranged worm sections,rather like a screw.The shaft turns horizontally in a cage consisting of barrel bars that are clamped together forming a kind of sloted tube around the shaft.In turning,the worm assembly moves the oil-seed from the feed-end to the dischage-end,expelling the oil through the slots between the bars of the of the cage.The oil-seed,as it moves along the shaft,loses oil,and its volume decreases accordingly.Small Scale Screw Pressing Machine can be used to press oil from Peanut,Coleseed ,Cottonseed,Sunflower Seed,Soya bean,cocoa nut,argan,sesame,black cumin,almond ,pomegranate seeds,Palm Kernal and other oil-seed material.