Shandong Leader Machinery Co.,ltd. Drying essence is take moisture away, but takes away the moisture temperature is not the most critical factor. The key for drying is depending on Seafood drying machine relative humidity within certain space, Shandong Leader Machinery Co.,ltd. took advantage of the Industrial use died fruits/ Shrimp/dried seafood dehydrator drying machine dry essence, originality developed a "Closed Cycle" dryer, changed the traditional heat pump dryer "bake" to "dehumidifier”. Its several advantages was unmatched by the traditional heat pump dryer Industrial use died fruits/ Shrimp/dried seafood dehydrator drying machine.Shandong Leader Machinery Co.,ltd. Group invested 350 million for Shandong Leader Machinery Co.,ltd.. in ShanDong Province. Seafood drying machine industrial is a modern high-tech enterprise focus on design and produce heat pump water heater, heat pump dryer, floor heating and Air conditioner .The application of Industrial use died fruits/ Shrimp/dried seafood dehydrator drying machine range from sanitary hot water supply, house and space heating, swimming pool heating to commercial usage. Factory area is 110,000 square meters and it is the one of the biggest heat pump Industrial use died fruits/ Shrimp/dried seafood dehydrator drying machine enterprise in China.
Why Choose KINKAI Heat Pump Dryer Machine?
Materials are dried in eight in the field (sun drying) or using high temperature dryer (electric, gas fired, etc.). Successful outdoor depends upon good weather and indeterminate weater can render a product worthless. High temperature drying can damage the nutrient content and impart an unpleasant smell to the dried product. Specialty crops such as ginseng, hebs, echinacca, etc., need to be dried at low temperatures (30-45 Celsius degree) for product quality optimization. This is an important consideration as they have a relatively high commercial value. Heating ambient air to use for drying, although a simple cost-effective procedure, is of limited application, particularly at higher ambient air relative humidities because of the low allowable maximum temperature conditions. Under high ambient mist air conditions, it may not even be possible to dry the material by conventional means. High temperature drying deteriorates the material structure and can render it unsuitable for future use. Low temperature drying of specialty crops reduces the risk of loss in nutrient content content and damage to physical properties. Drying system incorporating a dehumidification cycle have been developed that both conserve energy and handle the material gently. The dryer operates using a heat pump where both sensible and latent beats are recovered from exhaust air. The heat is then recycled back through the dryer by heating the air entering the dryer. The KINKAI Heat Pump Drying system is a combination of two sub-system: a heat pump and dryer, also the equipmentr have 3 times waste heat recovery.
A device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in refrigerator.
How to dry shrimps with KINKAI dryer
Steaming: Steaming or boiling shrimps in clear water is key to the curing process. Steam fresh shrimps for 10 minutes until they are easy to shell and the color of shrimps turn red from bluish white.
Drying: Shell the steamed shrimps, put them on the plate or rack on an even basis, and dry them at 50-65°C until the moisture content is reduced to 18%.
Inspection: Sort out the dried shrimps into groups and remove other things.
Measurement and packaging: Place them into the packing bags based on measurement after inspection.
Our Dryer Features
*Running Stable, operating easily
Touch screen, runnig stable, operating easily, can set different drying curve, suitable for drying different materials.
*Second waste heat recovery technology(patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving energy more than 70%.
*Exact control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 10-75C.
*Recovery volatilized component
Some kinds of material contain volatilized component, in drying processing, hot and wet air will become condenser water then drain, collect the condenser water so that collect volatilized component.
* Energy saving&Environmental protection
Adopt close dehumidify+hot air circulating drying type, saving operating cost; Without waste gas and waste heat pollution; Low noise
| Recommend Dryer + Drying Chamber Size|
|| Product Capacity
|| Drying Chamber size
|| One unit JK03RD dryer + drying chamber
|| 300Kg / batch
|| One unit JK06RD dryer + drying chamber
|| 600Kg / batch
|| One unit JK12RD dryer + drying chamber
|| 1000Kg / batch
|| Two units JK03RD dryers + drying chamber
|| 1300Kg / batch
|| Two units JK06RD dryers + drying chamber
|| 1500Kg / batch
|| Two units JK12RD dryers + drying chamber
|| 3500Kg / batch
Warm prompt: Drying Chamber Size can customize.
| Model Unit
| Power input
| Heating capacity
| Cooling capacity
| Power supply
|| 380V~3PH,50/60HZ OR 220V~1PH,50/60H
| Rated current
|| 380V: 10A 220V: 23A
| Dehumifification amount
| Max. hot air temperature
| Working ambient temperature
|| -10 ~45
|| -10 ~45
|| -10 ~45
Delivery and Package
1. For heat pump dryer part --- with plywood
2. For drying chamber and trolleys&trays
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL(less than container load), packed in plywood
A. Payment service
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
More details you require, please feel free to contact.
The company Shandong Leader Machinery Co.,ltd. has sheet metal, injection molding, painting, Eva. & Cond, carton &foam, water tanks, assembly, and other advanced production line Seafood drying machine. The configuration of laser cutting, CNC punching, CNC bending, automatic welding and other advanced production equipment and imported testing equipment. Shandong Leader Machinery Co.,ltd. have national standard laboratory, designed annual production 600,000 sets of various types of heat pump products Industrial use died fruits/ Shrimp/dried seafood dehydrator drying machine, the annual output value of 350 million dollars.The company has a large number of Seafood drying machine technical, management and marketing personnel, combined with the group for 20 years of technology and experience, research and development series product to subvert the traditional air source products. Only to be imitated, not be exceeded! Shandong Leader Machinery Co.,ltd. are self-esteem, self-confidence, self-reliance, will certainly become the industry leader in Seafood drying machine!
If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.
NOTE:We can specially design the machine according to your production's features.