High Efficiency Continuous type microwave pepper powder drying machine
Application Range:
This machine fits for drying and sterilizing powders, granular, sheet-like or gel-like food, and additive, spices, flavoring, medicine, raw material of herbal medicine, nutritional
health products, agricultural & sideline products, non-fired(or oil saving)instant noodles, noodles, rice powder needles, soy products, beef jerky, preserved meat, dried fish,
tea, tobacco and so on; and for drying, peeling and baking almond, peach kernel, groundnut
kernels, chestnut and so on; and for puffing of leisure food, pachyrhizus chips, potato chips, dried
shrimps, fish maw and so on; and for thawing the frozen fish, poultry; and for drying beans; and
for drying and desulfurating and deoxidizing the metallurgical chemical products; and for drying
printing and dyeing products, ceramics, glass, chemical fiber, cotton yarn, wood, leather, bamboo
products, insulation materials, building materials, wood , cork, alveolate, cardboard,corrugated
cardboard, and so on.
Operating principal:
This microwave source adopts continuous microwave magnetron as its microwave oscillation source. The
continuous magnetron is a kind of cross-field microwave radio tube, the direct current field and
the stationary magnetic field are vertical. The anode of the magnetron is a complex system of resonance.
The anode block consists of many little resonant cavity. Between them there is inductance coupling, so the
anode block is the crossover network of microwave. The electron eradiated from the cathode of the magnetron
will firstly be affected by the direct current field and curl like an angle. While the electrons are moving from
the cathode to the anode, the contrail of their movement is like a swing vibration. Under the condition
of synchronism between high frequency field and electron cloud, the electron contrail will rise toward the anode
direction and form electron spoke. Among the spoke, while the electrons are carrying through synchronistically,
they will change the potential energy into high frequency energy and increase the high frequency breadth. After the
magnetron is started, the direct current which is instored in the resonance cavity will be changed into super-high frequency energy, finally, microwave source of enough power will exported through wave-guide.
Features:
1, Fast heating. Microwave heating is completely different with traditional heating mode. It makes
heating medium become heater, do not need heat transfer process. Although thermal conductivity
is poor materials, also can achieve heating temperature in a very short time.
2,Save energy and efficiency. Because materials contain water absorb microwave easily and fever,
so in addition to a small amount of transmission loss outside, almost no other loss, so high
thermal efficiency, save energy.
3, Heating even. No matter how shape of each part of the body, microwave heating all can make
the object and evenly infiltration and electromagnetic wave list to produce the heat. So heating
good uniformity, won't appear the endogenous phenomenon focal.
4, Mouldproof, sterilization, fresh. Microwave heating has thermal and biological effect, can
sterilize and mould proof in low temperature.Due to heating rapidly, the time is short, can
maximum limit save material activity and the vitamin original colour and lustre and nutrition of
food.
5, Craft is advanced, control easily. Microwave heating just have the basic conditions of water,
electricity, as long as control power, can realize microwave heating or terminate immediately, use
microwave equipment can process automation control of heating process and heating process
specification.
6, Covers less area, safety and harmless. Because microwave can be controlled in made of metal
heating indoor and wave, so microwave leak is few, no radiation hazards and harmful gases, do
not produce the waste heat and dust pollution; Neither polluting food, also do not pollute the environment.
Technical parameters:
Microwave drying and sterilization machine for Chinese traditional medicine
Microwave frequency 2450±50MHz
Model |
Power input |
Power output |
Dehydrate |
Sterilization |
Transmission |
Size L*W*H |
|
KVA |
KW |
KG/H |
KG/H |
M/MIN |
MM |
JN-20 |
28 |
20 |
20-28 |
280-350 |
0-10 |
9550*820*1750 |
JN-30 |
42 |
30 |
30-42 |
400-480 |
0-10 |
10680*840*1750 |
JN-40 |
56 |
40 |
40-50 |
550-650 |
0-10 |
10680*1440*1750 |
JN-60 |
84 |
60 |
60-84 |
850-1000 |
0-10 |
12940*1440*1750 |
Such as: JN-40
Power supply
380V±10% 50HZ±1% three-phase five-wire
Microwave Output Frequency : 2450±50MHz
Microwave input apparent power: 56KVA
Microwave output power: 40KW
Microwave power adjustment range: 0-40KW(adjustable)
Ambient temperature: -5-40°C
Dehydrate: 40-50kg/h
Relative humidity: 80%, Surrounding environment:no corrosive gas, conductive dust
and explosive gas
Overall dimension(L*W*H): 10680*1440*1750 mm
Transmission speed:0-10m/min(adjustable)
Height of the inlet and outlet :60 mm
Microwave leak accord with a country GB10436-89 standards(
Equipment safety accord with GB-5226Electrical safety standard
accord with a country GB16798-1997 Food machinery health security index
Features:
1. The equipment is made of high-quality 304# stainless steel,fully meet with medicine machinery requirements;
2. Microwave leak:accord with a country GB10436-89 standards(≤5 mw/cm²);
3. Control system: PLC control interface or press-button control;
4. Adopt high-quality Panasonic magnetron,long life,best effect;
5. Low-temperature drying and sterilization,keep material character perfect,keep the ingredient.
As the microwave is needed to specially design for customer, accordiing to customer's requirements.
So just tell us your requirements, let us customize the model for you
Pictures:
If you are interested in our equipment-microwave drying&sterilization machine,please feel free to contact us.
Looking forward to your sooner inquiries.
Thank you very much.
Jinan Adasen Trade.,Ltd
English
