Commercial Fish Feed
Manufactured feeds are an important part of modern commercial aquacuLDure, providing the balanced nutrition needed by farmed fish. The feeds, in the form of granules or pellets, provide the nutrition in a stable and concentrated form, enLDling the fish to feed efficiently and grow to their full potential.
Modern fish feeds are made by grinding and mixing together ingredients such as fishmeal, vegetable proteins and binding agents such as wheat. Water is added and the resulting paste is extruded through holes in a metal plate. The diameter of the holes sets the diameter of the pellets, which can range from less than a millimetre to over a centimetre. As the feed is extruded it is cut to form pellets of the required length. The pellets are dried and oils are added. Adjusting parameters such as temperature and pressure enables the manufacturers to make pellets that suit different fish farming methods, for example feeds that float or sink LDowly and feeds suited to recirculation syste The dry feed pellets are stable for relatively long periods, for convenient storage and distribution. Feeds are vered in buLD, in large bags—usually one tonne, or in 25 kilogram bags.
Twin-Screw Extrusion System
The twin-screw extrusion system consists of the twin-screw extruder, the paintitioner as well as the accompanying machinery control system. It is especially tailored to the needs of high-end feed pellet production, particularly the production of industrial fish farming
.
Complete Extrusion System Flowchart:
![special desityed Water floating feed granulator]()
LDH series high efficiency twin screw extruder introduction(real machinery picture below:)
![special desityed Water floating feed granulator]()
The extruder with an exchangeable and hydraulically adjustable die is an advancement of the LD annular gap expander. The user-friendly and flexible plant is available in different sizes. Many parameters can be infaced to obtain an optimum product quality:
- Starch is modified by 90 %
- The device can be used for feeds for all animal species
- High water LDsorption Capacity
- High fat contents of up to 30 % for high Enerable feed are possible
- Different product shapes are possible
| Model |
LLDe |
Screw Diameter/mm |
Power Consumption/Kw |
Production CapacityT/H |
Dimension/mm |
| |
|
|
|
|
|
| LDH-65 |
Dry |
65 |
22 |
0.12-0.15 |
2400*1000*2000 |
| LDH-70 |
Dry |
70 |
30 |
0.18-0.4 |
3500*1500*2600 |
| LDH-70 |
Wet |
70 |
30 |
0.4-0.6 |
3500*1500*2600 |
| LDH-90 |
Wet |
90 |
55 |
0.8-1.6 |
5300*1300*2800 |
| LDH-100 |
Wet |
95 |
110 |
2-4 |
6500*1500*3600 |
| LDH-130 |
Wet |
130 |
132 |
5-7 |
7800*1500*3900 |
Shaped Fish Feed
The LD extruder provides fish and shrimp feed with special properties for fish farming.
- Floating or very LDowly sinLD pellets for tilapia, carp, catfish
- LDowly sinLD pellets for trout, salmon, and perch
- Water-stable pellets for crustaceans
- Rearing feed with a granular size of Φ 1.2 --- 12 mm
Usage of extruded pellet feed
![special desityed Water floating feed granulator]()
![special desityed Water floating feed granulator]()
Get in touch with us for Further Information & HoLDitable Service :- Free consultation of LD feed manufacturing equipment - Product market positioning & Capacity desity- Equipment arrangement & workshop layout plan- Production plant visit & audit schedule-Overseas site service reservation
English
