Seed Hydraulic Press Machine operating principle:
1.When oil press is on work, material enters the extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.
2.Under hightemperature condition in the chamber, there is quite strong friction among press screw, chamber and the oil materials.
3.On the other hand, root diameter of the pressing screw carries larger from one end to the other.
4.Hence when rotating, the thread not only pushes particles moving forwards but also turns them outwards as well.
5.Meanwhile, particles adjacent the screw will rotate along with screw’s rotating, causing every particle inside the chamber to possess different speed.
6.Therefore, relative movement among particles creates neat which is necessary during manufacturing because of helping protein change property, damage colloid, increase plasticity, decrease oil’s elasticity, resulting in high oil.
More than 30 years including 5 years overseas market experience of designing and installing complete Seed Hydraulic Press Machine,Shandong Leader Machinery Co.,Ltd. are now a leading company in Mini Crude Oil Refinery Plant Cost field.
Shandong Leader Machinery Co.,Ltd. supply various Seed Hydraulic Press Machine and connected equipments :
(1) High oil yield,obvious economic benefit .
(2) Lower residual oil rate in the dry meal .
(3) Improving the quality of the meal .
(4) Low processing cost , high productivity.
(5) Saving energy,saving labor.
Mini Crude Oil Refinery Plant Cost
Technological Process Flowchart For Mini Crude Oil Refinery Plant Cost
Project Introduction For Mini Crude Oil Refinery Plant Cost
Alkali hot water
Crude oilâfilterâmixâreactorâmixâreactorâcentrifugal separationâoil residue
Phosphoric acid hot waterâmix â
degumming oilâcoolerâdryâcentrifuge separationâmixâalkali liquor
bleaching earthâmixâdecoloringâfilterâdecoloring oilâmixâheat
Project Process For Mini Crude Oil Refinery Plant Cost
A.The purpose of degumming is to remove the phospholipid, sugar, protein, trace mental,
and some other impurities, which have bad effect on the stability of the oil. First, the oil
should be heated to 90to105Â°C, then put some phosphoric into it and stir. It mainly transfer
the phospholipid to that can be compatible with water. Then add some salt water to gather
the impurities, which subside to the bottom and be discharged.
Add some certain quantity of alkali to neutralize the free fatty acids. During this process, some
soapstock will be produced.The soapstock will be separated from the oil after using the centrifugal
A.Mix the oil with activated clay in the oil soil mixing tank, and 1 ton oil needs 5kg clay. Then
stir it 10 minutes at 10Â°C. Next, pump the mixed oil into the decolorization tower. It use
steam to heat the mixed oil at 100Â°C, and the process lasts 30-40 minutes.
The filter capacity can reach 200meshes. First, we use the filter to remove the clay in the oil,
then use the bad filter to purify the oil again. The diameter of the filtering can reach 5Î¼m.
The main purpose of deordorization tower is to remove fatty acid and some odor material.
The principle of the deordorization is to use the high temperature and vacuum to remove
the odor. The fatty acid and odor will be stalled in the storage tank.
(4)Automatic Control System
Our company has applied the automatic control system with advancedness, security, reliability
into the pretreatment, extraction, refining and fractionation in large oil plants. For its application
in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person
only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.
Project Advantage For Mini Crude Oil Refinery Plant Cost
1.By combining several years' practical experience, adopting a kind of unique deguming technology,
extending the phosphoric acid and oil reaction time and adding specific additives, our equipment
can remove phospholipids in oil to the maximum.
2.The new carclazyte automatic quantitative system can produce more reliable oil of good quality, with
less investment for the full vacuum closed refining technology.
3.We can design the optimum refining scheme according to different oils and different requirements
Project Energy Cosumption For Mini Crude Oil Refinery Plant Cost
â¤ 300Kg/T oil
â¤ 22KWH/T oil
Oil content in waste white clay
Soft water consumption
Shandong LD Grain&Oil Machine Co.,Ltd has applied the automatic control system with advancedness, security, reliability into the pretreatment, extraction, refining and fractionation in large oil plants. For its application in automatic control system, it can control the production in the entire workshop and monitor the operational status of each device by controlling the computer terminals in the room. One person only can operate the entire workshop, with efficient production management. It has reduced the production cost greatly and improved the management efficiency.
1. The Shandong Qiâe grain and oil machinery companyâs experts guide installation and have good technology.
We make the cooperation with Qiâe group many times. Their experts guide installation on-site and after-sales team provides 24 hours of technical services.
I think they have done a well in this respect. Among the large number of grease equipment manufacturers, they are very good in China. Hope we can continue to cooperate in the future.
2. Shandong Qiâe grain and oil machinery companyâs equipment have good quality, and shipped on time.
We make the cooperation with Qiâe group for long time. Because they are manufacturer, their equipment have good quality assurance and reasonable price. They shipped on time after we finish contract.
If you are interested in our products, please kindly send me your inquiry details in the Below , Click "Send" Now!
Shandong Leader Machinery Co.,Ltd. is one of the leading Manufacturers and Suppliers of Mini Crude Oil Refinery Plant Cost.Shandong Leader Machinery Co.,Ltd. manufacture Mini Crude Oil Refinery Plant Cost making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Seed Hydraulic Press Machine for you reference,such as Mini Crude Oil Refinery Plant Cost ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Seed Hydraulic Press Machine.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:email@example.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Mini Crude Oil Refinery Plant Cost, inform us raw material you want to use for Mini Crude Oil Refinery Plant Cost,and specific requirements for Mini Crude Oil Refinery Plant Cost.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Seed Hydraulic Press Machine.