English
See More
Working capacity 200 to 2500 kg per load heat pump drier for fruits and vegetables are widely used for drying and sterilizing powder, granular, flakes or colloidal form foods, nutritional health products, grain, agricultural and sideline products(rice, cornmeal), food, vegetables, and fruits, seafood, pickles,spices ( chilli powder, ginger powder, garlic powder, aniseed, cinnamon, angelica, cassia bark, fennel etc) , jam, a variety of small packaging and pet food mildew sterilization preservation.
Working capacity 200 to 2500 kg per load heat pump drier for fruits and vegetables of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Working capacity 200 to 2500 kg per load heat pump drier for fruits and vegetablesfor herbs mainly use in drying and sterilizing for all kinds of tablets, pills, powder, oral liquid, medicine bottle, winebottle, Chinese- western medicine and medical gloves and garments.
Working capacity 200 to 2500 kg per load heat pump drier for fruits and vegetables
Product Description
Heat Pump Drier For Fruits and Vegetables Introduction
Do you want to take advantage of heat in the air to dry fruits and vegetables with free ?
Do you want to have an automatic controlling dryer machine?
LD third generation heat pump drier for fruits and vegetables is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical enerLD,as in a refrigerator, circumfluent hot-air assures uniform drying and high efficiency.
Model: JK03RD, JK06RD, JK10RD
Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ
Heat enerLD: 75% air source + 25% electric power
Max. Temp: 75℃
Working Temp: -10~45℃
Functions: Heating / Cooling / Dehumidify
Dryer Type: 200~2500kg per batch
Features of Heat Pump Drier For Fruits and Vegetables
1, EnerLD saving
Adopt air to air heat pump technoloLD, absorb heat from air and recovery waste heat at the same time
Adopt close dehumidify + circulating drying type, saving operating cost;
2, Easy operating control system
The drying temperature can be easily controlled by PLC +Touch Screen control system.
3, Uniform drying
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so the raw materials can be dried evenly
4, The temperature: 10-75°C, Max 75°C
5, The baking plate dimensions and materials can customize as customer request.
6, During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content;
7, Safe and reliable operation
Automatic intelligent control, 24-hour continuous drying; Without waste gas and waste heat pollution,low noise
Stable operation without being influenced by weather
Applicatons
Specifications of Heat Pump Drier For Fruits and Vegetables
| Model | JK03RD | JK06RD | JK10RD | |
| Power supply | V/PH/HZ | 380/3/50 or 220/1PH/50 | 380/3/50 | 380/3/50 |
| Power input | KW | 2.8 | 5.8 | 10.8 |
| Running current | A | 8/17 | 12.6 | 22.5 |
| Auxiliary electric heater(option) | KW | 9 | 9 | 9 |
| Heating capacity | KW | 12 | 26 | 35 |
| Cooling capacity | KW | 7.5 | 20 | 25 |
| Dehumidification amount | L/H | 8 | 20 | 40 |
| Max. hot air Temperature | ℃ | 75 | 75 | 75 |
| Working ambient temperature | ℃ | -10~45 | -10~45 | -10~45 |
| Refrigerant | Kg | Mixture type/2.5 | Mixture type/4.3 | Mixture type/8.0 |
| Compressor | Type | Scroll | Scroll | Scroll |
| Brand | Copeland/Danfoss | Copeland/Danfoss | Copeland/Danfoss | |
| Quantity | 1 | 1 | 2 | |
| Noise | dB(A) | 60 | 65 | 70 |
| Fan motor for drying | Power input/unit | 250W/unit | 250W/unit | 250W/unit |
| Wind volume | m3/H | m3/H | 2500m3/H/unit | |
| Recommend qty | 8 | 8 | 16units | |
| Heat regenerator size | mm | 500*350*350 | 500*500*580 | 550*600*680 |
| Fan motor for heat regenerator (dehumidify) |
Power input | 200W | 370W | 550W |
| Wind volume | 2000m3/H | 2000m3/H | 3500m3/H | |
| Size(mm) | 450*330*380 | 470*320*470 | 580*320*580 | |
| Wind valve | Power input | 6W | 6W | 6W |
| OPEN | Exchange fresh air | Exchange fresh air | Exchange fresh air | |
| CLOSE | Drying | Drying | Drying | |
| Size(mm) | 480*320*120 | 630*560*120 | 720*640*125 | |
| Fan motor for evaporator (2 units) |
Power input | 250W/unit | 780W/unit | 780W/unit |
| Wind volume | 4600m3/H | 10500m3/H | 2*10500m3/H | |
| Rotate speed | 1350RPM | 1350R/Min | 1350R/Min | |
| Hot air outlet | mm | 600*1100 | 650*1100 | 860*1485 |
| Hot air return inlet | mm | 690*1100 | 750*1100 | 1050*1450 |
| Dimension(L*W*H) | mm | 1650*960*1280 | 1720*1160*1280 | 2100*1460*1590 |
| Net weigLD | Kg | 210 | 385 | 480 |
| Gross weigLD | Kg | 240 | 420 | 540 |
Buying Guides
Recommend Dryer+Drying Chamber Sizes
| Item | Description | Product Capacity | Drying Chamber size |
| 1 | One unit JK03RD dryer + drying chamber | 300Kg / batch | 3300*1900*2200mm |
| 2 | One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm |
| 3 | One unit JK10RD dryer + drying chamber | 1000Kg / batch | 6000*3000*2200mm |
| 4 | Two units JK03RD dryers + drying chamber | 1200Kg / batch | 7000*2200*2200mm |
| 5 | Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm |
| 6 | Two units JK10RD dryers + drying chamber | 2500Kg / batch | 10000*3000*2200mm |
Warm prompt: We can make any drying chamber sizes as your required.
Company Information
Factory and Workshop
Customers and Our team
Packaging & Shipping
For heat pump dryer parts---with plywood
For drying chamber +trolleys
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL( less than container load), packed in plywood.
Our Services
A. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
If you are interested in our heat pump dryer,please feel free to contact us for more informations,such as catalogue,video,etc.
Crispy Rice Food Processing Line
