Heat Pump Dehydrator Type Vegetable and Fruit Drier Machine are widely used for drying and sterilizing powder, granular, flakes or colloidal form foods, nutritional health products, grain, agricultural and sideline products(rice, cornmeal), food, vegetables, and fruits, seafood, pickles,spices ( chilli powder, ginger powder, garlic powder, aniseed, cinnamon, angelica, cassia bark, fennel etc) , jam, a variety of small packaging and pet food mildew sterilization preservation.
Heat Pump Dehydrator Type Vegetable and Fruit Drier Machine of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Heat Pump Dehydrator Type Vegetable and Fruit Drier Machinefor herbs mainly use in drying and sterilizing for all kinds of tablets, pills, powder, oral liquid, medicine bottle, winebottle, Chinese- western medicine and medical gloves and garments.
Heat Pump Dehydrator Type Vegetable and Fruit Drier Machine
Product Description Heat Pump Dehydrator Type Vegetable and Fruit Drier Machine Introduction
Do you want to take advantage of heat in the air to dry vegetables fruits with free ?
Do you want to have an automatic controlling dryer machine?
Do you want to have an uniform drying?
LD third generation heat pump dehydrator type vegetable and fruit drier machine is a device that transfers heat from a colder area(ambient temperature) to a hotter area(drying chamber) by using mechanical enerLD. Dryer evaporator of refrigerant absorb the air from outside, then compressor works that make the air temperature rise, heat exchanger change the hot air into drying chamber, final vegetables fruits will be dried by the hot air circulating in drying chamber. Cycle hot air assures uniform drying and high efficiency.
Model: JK03RD, JK06RD, JK10RD
Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ
Heat enerLD: 75% air source + 25% electric power
Max. Temp: 75℃
Working Temp: -10~45℃
Functions: Heating / Cooling / Dehumidify
Dryer Type: 200~2500kg per batch
What is Features of Heat Pump Dehydrator Type Vegetable and Fruit Drier Machine?
1, EnerLD saving
Adopt air to air heat pump technoloLD, absorb heat from air and recovery waste heat at the same time
Adopt close dehumidify + circulating drying type, saving operating cost;
2, Easy operating control system
The drying temperature can be easily controlled by PLC +Touch Screen control system.
3, Uniform drying
By using the forced ventilation function, there are partition sheet and fan motors inside the drying chamber to make sure hot air cycle, so the raw materials can be dried evenly
4, The temperature: 10-75°C, Max 75°C
5, The baking plate dimensions and materials can customize as customer request.
6, During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content;
7, Safe and reliable operation
Automatic intelligent control, 24-hour continuous drying; Without waste gas and waste heat pollution,low noise
Stable operation without being influenced by weather
Applications
Drying Before
After Dried
Specifications of Heat Pump Dehydrator Type Vegetable and Fruit Drier Machine
Model |
JK03RD |
JK06RD |
JK10RD |
Power supply |
V/PH/HZ |
380/3/50 or 220/1PH/50 |
380/3/50 |
380/3/50 |
Power input |
KW |
2.8 |
5.8 |
10.8 |
Running current |
A |
8/17 |
12.6 |
22.5 |
Auxiliary electric heater(option) |
KW |
9 |
9 |
9 |
Heating capacity |
KW |
12 |
26 |
35 |
Cooling capacity |
KW |
7.5 |
20 |
25 |
Dehumidification amount |
L/H |
8 |
20 |
40 |
Max. hot air Temperature |
℃ |
75 |
75 |
75 |
Working ambient temperature |
℃ |
-10~45 |
-10~45 |
-10~45 |
Refrigerant |
Kg |
Mixture type/2.5 |
Mixture type/4.3 |
Mixture type/8.0 |
Compressor |
Type |
Scroll |
Scroll |
Scroll |
Brand |
Copeland/Danfoss |
Copeland/Danfoss |
Copeland/Danfoss |
Quantity |
1 |
1 |
2 |
Noise |
dB(A) |
60 |
65 |
70 |
Fan motor for drying |
Power input/unit |
250W/unit |
250W/unit |
250W/unit |
Wind volume |
m3/H |
m3/H |
2500m3/H/unit |
Recommend qty |
8 |
8 |
16units |
Heat regenerator size |
mm |
500*350*350 |
500*500*580 |
550*600*680 |
Fan motor for heat regenerator (dehumidify) |
Power input |
200W |
370W |
550W |
Wind volume |
2000m3/H |
2000m3/H |
3500m3/H |
Size(mm) |
450*330*380 |
470*320*470 |
580*320*580 |
Wind valve |
Power input |
6W |
6W |
6W |
OPEN |
Exchange fresh air |
Exchange fresh air |
Exchange fresh air |
CLOSE |
Drying |
Drying |
Drying |
Size(mm) |
480*320*120 |
630*560*120 |
720*640*125 |
Fan motor for evaporator (2 units) |
Power input |
250W/unit |
780W/unit |
780W/unit |
Wind volume |
4600m3/H |
10500m3/H |
2*10500m3/H |
Rotate speed |
1350RPM |
1350R/Min |
1350R/Min |
Hot air outlet |
mm |
600*1100 |
650*1100 |
860*1485 |
Hot air return inlet |
mm |
690*1100 |
750*1100 |
1050*1450 |
Dimension(L*W*H) |
mm |
1650*960*1280 |
1720*1160*1280 |
2100*1460*1590 |
Net weigLD |
Kg |
210 |
385 |
480 |
Gross weigLD |
Kg |
240 |
420 |
540 |
Buying Guides Recommend Dryer+Drying Chamber Sizes
Item |
Description |
Product Capacity |
Drying Chamber size |
1 |
One unit JK03RD dryer + drying chamber |
300Kg / batch |
3300*1900*2200mm |
2 |
One unit JK06RD dryer + drying chamber |
600Kg / batch |
6000*2800*2200mm |
3 |
One unit JK10RD dryer + drying chamber |
1000Kg / batch |
6000*3000*2200mm |
4 |
Two units JK03RD dryers + drying chamber |
1200Kg / batch |
7000*2200*2200mm |
5 |
Two units JK06RD dryers + drying chamber |
1500Kg / batch |
10000*2800*2200mm |
6 |
Two units JK10RD dryers + drying chamber |
2500Kg / batch |
10000*3000*2200mm |
Warm prompt: We can make any drying chamber sizes as your required
Company Information Factory and Workshop
Customers and Our Team
Packaging & ShippingFor heat pump dryer parts---with plywood
For drying chamber +trolleys
If shipped with 20ft container or 40ft container, no packing
If shipped with LCL( less than container load), packed in plywood.
Our Services
A. Technical service
1, We calculate the capacity and recommend the LD models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
B. After-sales service
1, Technical support for your installation, operation and maintenance.
2, One year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
If you are interested in our heat pump fruit dryer, welcome to contact us for more informations, such as catalogue, video, etc.