Sealed Circulation Fruit Drying Chambers, Drying Chambers for Fruits are widely used for drying and sterilizing powder, granular, flakes or colloidal form foods, nutritional health products, grain, agricultural and sideline products(rice, cornmeal), food, vegetables, and fruits, seafood, pickles,spices ( chilli powder, ginger powder, garlic powder, aniseed, cinnamon, angelica, cassia bark, fennel etc) , jam, a variety of small packaging and pet food mildew sterilization preservation.
Sealed Circulation Fruit Drying Chambers, Drying Chambers for Fruits of traditional Chinese medicine, also known as microwave traditional Chinese medicine dryer, microwave traditional Chinese medicine drying equipment, microwave medicine drying insecticidal, the same type of industrial microwave equipment, apply to heat-sensitive Chinese medicine, and valuable health herbs such as ginseng and other herbsdrying, sterilization processing.
Sealed Circulation Fruit Drying Chambers, Drying Chambers for Fruitsfor herbs mainly use in drying and sterilizing for all kinds of tablets, pills, powder, oral liquid, medicine bottle, winebottle, Chinese- western medicine and medical gloves and garments.
Sealed Circulation Fruit Drying Chambers, Drying Chambers for Fruits
Product Description LD Fruit Drying Chambers Introduction
LD heat pump fruit drying machine is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical enerLD, as in a refrigerator.
Why choose heat pump dryer?
New TechnoloLD Advantage of heat pump dryer
1. EnerLD saving & Environmental protection
Adopt close dehumidify + circulating drying type, saving operating cost;
Without waste gas and waste heat pollution, low noise
2. Running Stable, operating easily
PLC + Touch Screen, running stable, operating easily;
Adopt PLC control, can setting different drying curve,
Suitable for drying different materials.
3. Second waste heat recovery technoloLD (patent)
Adopt air to air heat exchanger dehumidify and recovery waste heat at the same time, saving enerLD more than 40%.
4. Exact control temperature and humidity
According to different material setting different drying curve, the heat pump dryer can control the drying chamber temperature between 20-80℃
5. Recovery volatilized component
Some kinds of material contain volatilized component, in drying processing, hot and wet air will become condenser water then drain, collect the condenser water so that collect volatilized component.
Technical Parameters
Model |
JK03RD |
JK06RD |
JK10RD |
Power supply |
V/PH/HZ |
380/3/50 or 220/1PH/50 |
380/3/50 |
380/3/50 |
Power input |
KW |
2.8 |
5.8 |
10.8 |
Running current |
A |
8/17 |
12.6 |
22.5 |
Auxiliary electric heater(option) |
KW |
9 |
9 |
9 |
Heating capacity |
KW |
12 |
26 |
35 |
Cooling capacity |
KW |
7.5 |
20 |
25 |
Dehumidification amount |
L/H |
8 |
20 |
40 |
Max. hot air Temperature |
℃ |
75 |
75 |
75 |
Working ambient temperature |
℃ |
-10~45 |
-10~45 |
-10~45 |
Refrigerant |
Kg |
Mixture type/2.5 |
Mixture type/4.3 |
Mixture type/8.0 |
Compressor |
Type |
Scroll |
Scroll |
Scroll |
Brand |
Copeland/Danfoss |
Copeland/Danfoss |
Copeland/Danfoss |
Quantity |
1 |
1 |
2 |
Noise |
dB(A) |
60 |
65 |
70 |
Fan motor for drying |
Power input/unit |
250W/unit |
250W/unit |
250W/unit |
Wind volume |
m3/H |
m3/H |
2500m3/H/unit |
Recommend qty |
8 |
8 |
16units |
Heat regenerator size |
mm |
500*350*350 |
500*500*580 |
550*600*680 |
Fan motor for heat regenerator (dehumidify) |
Power input |
200W |
370W |
550W |
Wind volume |
2000m3/H |
2000m3/H |
3500m3/H |
Size(mm) |
450*330*380 |
470*320*470 |
580*320*580 |
Wind valve |
Power input |
6W |
6W |
6W |
OPEN |
Exchange fresh air |
Exchange fresh air |
Exchange fresh air |
CLOSE |
Drying |
Drying |
Drying |
Size(mm) |
480*320*120 |
630*560*120 |
720*640*125 |
Fan motor for evaporator (2 units) |
Power input |
250W/unit |
780W/unit |
780W/unit |
Wind volume |
4600m3/H |
10500m3/H |
2*10500m3/H |
Rotate speed |
1350RPM |
1350R/Min |
1350R/Min |
Hot air outlet |
mm |
600*1100 |
650*1100 |
860*1485 |
Hot air return inlet |
mm |
690*1100 |
750*1100 |
1050*1450 |
Dimension(L*W*H) |
mm |
1650*960*1280 |
1720*1160*1280 |
2100*1460*1590 |
Net weigLD |
Kg |
210 |
385 |
480 |
Gross weigLD |
Kg |
240 |
420 |
540 |
Recommend Dryer+Drying Chamber Sizes
Item |
Description |
Product Capacity |
Drying Chamber size |
1 |
One unit JK03RD dryer + drying chamber |
300Kg / batch |
3300*1900*2200mm |
2 |
One unit JK06RD dryer + drying chamber |
600Kg / batch |
6000*2800*2200mm |
3 |
One unit JK10RD dryer + drying chamber |
1000Kg / batch |
6000*3000*2200mm |
4 |
Two units JK03RD dryers + drying chamber |
1200Kg / batch |
7000*2200*2200mm |
5 |
Two units JK06RD dryers + drying chamber |
1500Kg / batch |
10000*2800*2200mm |
6 |
Two units JK10RD dryers + drying chamber |
2500Kg / batch |
10000*3000*2200mm |
Successful projects
Packaging & Shipping Packaging Details
Our Services Our service
1) OEM service
2) Produce heat pump dryer according to customer's special demands.
3) Supply spare parts according to order quantity.
4)Technical support for your installation, operation and maintenance.
5) One year’s warranty, and you can pay for extended warranty.
6)Spare parts and technical support at most economic prices after the warranty
If you are interested in our heat pump dryer, please contact us for more information (such as catalogue,video,prices,etc).