High efficient vegetable oil refining machine for vegetable oil processing plant
Vegetable oil processing plant machine
Product Description Raw Material:
The oil machine is suitable for different materials, but the process of each materials is various. If you really need to process oilseeds, welcom to know much from us. The main materials is Vegetable, peanut, palm, sunflower, corn germ, soybean, sesame, cottonseeds and so on.
Vegetable oil processing plant machine
The whole process for vegetable oil processing plant equipment includes pretreatment, oil solvent etraction machine and oil refinery sections.
1. Craft flow for pretreatment workshop
groundnut magnetic bo cleaning crushing machine flaking roll plate LD to etraction workshop
Main Equipments:
1. Magnetic bo: Clearing the iron impurity in the soybean. In order to avoid the harmful to the following machines, the iron impurity need be moved first.
2. Cleaning: There are many different imputities in the soybean such as small stone, earth, straw and so on. They are not only broken the machine, but also effect the quality of final oil.
3. Crushing machine: The size of soybean is big, so it must be separated to 6-8 pieces. This will help to etract oil.
4. Flaking roll: The soybean pieces need be make to think cake. At the same time, the cell in the soybean is broken, so the oil is easy to go out.
5. Plate LD: The water content of the etractor must be about 10%, so the LD is used to adjust the water content in this step.
2.Craft flow for Vegetable oil processing plant machine
solvent
extractor mied oil 1st and 2nd evaporation stripping tower crude soybean oil
Wet meal DTDC toaster cake
Main Equipments:
1. Roary etractor: The spray and soak the cake with solvent, so that oil fats can be dissolved in solvent (form miscella). After this step, wet meal and miscella (mied oil) are got.
2. 1st evaporator: The miscella (mied oil) will be sent to 1st evaporator to separate the oil and solvent. About 85% of oil can be separated from the mied oil in this step.
3. 2nd evaporator: After the separating in the 1st the evaporator, the mied oil is sent to 2nd evaporator. By the higher temperature and vacuum, 95% of the oil is get out from the solvent.
4. Stripping tower: This is the lastest step to separate the mied oil. In this machine, all the oil will be seperated from the solvent.
5. DTDC toaster: The cake from the etractor will enter the DTDC toaster. The solvent in the cake can be moved out. Then the solvent can be recycled. The cake after separating solvent will dried in the toaster. Then you can storage it directly.
6. Condensers: The solvent from evaporate, stripping tower and toaster will recycled by the condenser. Then the running cost will be reduced.
3. Craft flow for Vegetable oil processing plant machine
Crude oil degumming and deacidification decolorization deodorization refined oil.
No. |
Section Name |
1 |
Crude oil degumming section |
Add hot water and food grade phosphoric acid to mi with crude peanut oil to finish
degumming, mainly removing phospholipids,protein, colloid and trace metal ions. Separate oil sediments from oil with centrifuge, then dehydrate and dry oil.
|
2 |
Deacidification section |
Continuous physical deacidification method and batch chemical deacidification method are the most common deacidification methods for removing FFA.
Physical deacidification method. Under high vacuum condition, adopt steam distillation method to carry FFA with steam and remove it.
Chemcial refining. Add alkali to neutralize free fatty acid to form soap-stock , sedimentary soap-stock will be separated from oil.
|
3 |
Bleaching section |
Mi active bleaching clay with oil under vacuum condition for LDorption bleaching,
and use leaf filter to remove waste bleaching clay.
|
4 |
Deodorization section |
Under high temperature and high vacuum condition,utilize water vapour distillation
to remove odor of oil.
|
|
|
Pictures of our equipments:
Certificate:
Customer visit:
Contact us