- Place of Origin:
- Shandong, China (Mainland)
- Brand Name:
- Min.Order Quantity:
- 1 Set/Sets
- US $10,000 - 200,000/ Set
- Payment Terms:
- paypal,UnionPay, Visa/MasterCard, Amex, Discover,T/T
- Supply Ability:
- 30 Set/Sets per Month
see more +
Industrial tunnel type microwave rubber drying machine
1. Drying even ,from inside to outside, symmetrical drying
2. Can drying and sterilizing at the same time
3. Less enerLD loss, save enerLD
4. Can continuous working, easy to control, advanced craft
The equipments are used for the rapid drying of powder, granular, pasty materials, such as glass fiber,raw chemical materials, cellulose (eg hydroxyethLD cellulose, carboxymethLD cellulose, etc.), mannitol, nickel hydroxide, lithium cobalt oxide, graphite, carbon brushes, silicon carbide, calcium chloride dihydrate(Calcium chloride two hydrate), zirconium oxychloride, zirconium oxide, copper oxide, aluminum oxide, zirconium hydroxide, zirconium carbonate, copper carbonate, manganese carbonate, zirconium sulfate,ammonium zirconium carbonate,zirconium silicate, zirconium potassium carbonate, oil-based ink, water-based ink, expandable graphite, a variety of ceramic zirconium oxide, iron oxide,cobalt oxalate,talcum powder etc.
The design features of microwave drying machine
a. Speed of Conveying belt is adjustable.
In the transmission system, it applies frequency-converting control of speed, worm gear reducer.
b. The conveyor belt is Teflon Belt,special for microwave.
c. The deviation of belt is adjusted with Hand-movement.
2. The body of the Tunnel
a.The body of the microwave tunnel is made of Stainless Steel. In side there is one set of humidity extraction system to extract the humidity after heating.
b. To be safe, there is Automatic Power-off device while open the door of the machine.
c. The protecting case of Magnetic-pipe and transformer is made of stainless steel. On top there is one set of Heat extraction system to extract the heat enerLD generated by
working of machine.
d.The frame of machine is made of Stainless Steel pipe ,others is made of cold-rolled sheet painted.
e.One set of infrared thermometric is installed at the outlet of the tunnel to measure the temperature.
3.The controlling system
a. On the outside panel there are frequency converting speed controller, emergency stop button, Start, Stop buttons,
b. All the controlling components will be installed into one controlling box, which is at the entrance of the machine.
c.Ordinary button control system,.
d.The microwave power can be adjusted by choosing in the display text.
e. Every microwave source is an independent unit.If one is broken, the machine will not be prevented from running.
f. Every magnetron has an overheating protection device.
4.Main technical parameters:
Power Supply: 380V±10% 50HZ±1% three-phase five-wire
Microwave output frequency:2450±50MHz
Microwave input apparent power:≤42KVA
Microwave output power:≥30KW
Microwave power adjustment range:0-30KW(adjustable)
Ambient temperature: -5-40°C
Relative humidity: 80%, Surrounding environment:no corrosive gas, conductive dust and explosive gas.
Overall dimension(L*W*H):about 10500*1440*1750 mm (customized)
Transmission speed: 0-10 m/min(adjustable)
HeigLD of the inlet and outlet : 60 mm(can design according to customers' requirements)
Microwave leak: country GB10436-89 standards(5 mw^2)
Equipment safety: accord with GB-5226Electrical safety standard
accord with a country GB16798-1997 Food machinery health
Please note:Inlet/outlet orifice,conveyor belt size and overall dimension can be designed according to your requirements.
Some pictures reference