microwave has penetrability and changes with the frequency,the depth of penetration normally from several mm to tens of cm,both the outside and inside of the material can be heated at the same time,therefore avoiding the phenomenon of overheating of the outside while the inside uncooked.Microwave heating changes the heated object to be the heating object,no heat conduction will be necessary.It takes short time for the poor heat conductivity material to reach the heating temperature.The efficiency will be increased greatly by using the microwave,and also the productivity and the quality.
2. Power saving and high efficiency
Material containing water can easily absorb the microwave and be heated,thereby there is almost no loss except the loss during the transportation,therefore high heating effect with low power consumption.
3. Mold proofing,sterilization and keeping freshness
Microwave heating has both heat effect and biological effect,can sterilize and proof mold in lower temperature.Because of the rapidly heating within short time,microwave heating can mostly save the activity,color and nutritious parts of the material.
4. Advanced technology with auto-control
The heating and the termination can be realized by the control of the power of the microwave,there will be no thermal lag.It can be automatically controlled by control panel.
5. Selectivity of heating
Microwave has different functions for material with different dielectric properties,this is beneficial to heating process,because water molecule absorb microwave the best.The part containing high water absorbs more microwave power than the one containing the less water,this is the selectivity of the microwave .While heating wood and paper,this feature can be used to heat and dry homogeneously.Please pay attention that some material will absorb the microwave better at higher temperature,the positive feedback causes the temperature of this material to increase dramatically.It’s necessary to set reasonable heating process.
6. Safety and harmless,the improvement of working environment
The microwave can be controlled in the heat conducting room made of metal and waveguide tubes,so there will almost be no leakage of microwave,no the harm of radiation and the disposal of harmful gas,no waste heat and dust,thus greatly improving the working environment and intensity of labour.
Main technical parameter
Company Information
Shandong Dongxuya Machinery and Equipment Co., Ltd is a company specialized in producing twin-screw food extruder, single screw extruder, microwave roasting and sterilization equipments, etc. While based upon domestic market, the company opens and exploits market abroad positively. Until now, our products have been exported many counties and regions, including Russia, Europe, Africa, Korea, Indonesia, UZ (Uzbekistan) and the market share increases gradually year by year. Dongxuya will continue to be aggressive, creative and make a contribution to our country’s food industry development with peers home and abroad.
China is the country of origin of soybean, which has a history of 5000 years. Soybean was introduced to Southeast Asia through China and then to America through Europe. At present, soybean is the most important oil crop in the world. In 2000, soybean...
China is the country of origin of soybean, which has a history of 5000 years. Soybean was introduced to Southeast Asia through China and then to America through Europe. At present, soybean is the most important oil crop in the world. In 2000, soybean yield...
Pot, the earliest refers to the bottoms of the pot when cooking burnt rice. It is called "pot coke" in Guangdong, "pot slag" in Shanxi and "pot bar" in Sichuan. In Sichuan, the folk proverb "Don't eat pot, don't turn around the kitchen table" was once...